Window films

Discover our range of adhesive window films

Solar protection films, safety films, design films, automotive films, printing films

Safety

Transparent / Safe 4 XC

Safer 4 XC solvent resistant films provide highly effective protection against tags and graffiti. The film's protective qualities are not limited to solvents, it will also shield a window's surface from other acts of vandalism involving scratching or acid etching. An easy film to install and replace, it is also classed as a security film, providing protection by holding shattered glass in place in the event of an explosion or serious impact.

Warranty See the notice
Fire-resistance rating M1
Storage from -5°C to +40°C 3 YEARS
REACH RoHS compliant Respected
Widths available:
122 cm
152 cm
183 cm
Construction

1. ''Hard'' scratch resistant layer, for durability and ease of maintenance during window cleaning

2. High optical quality polyester

3. Bonding adhesive

4. High optical quality polyester

5. Reinforced PS Adhesive to accompany the elasticity of the film in case of impact, glass polymerization within 30 days

6. Protection release liner, disposable after installation

Maintenance instructions

Safety film with reinforced PS adhesive requiring a suitable application solution (Film On ref 600-F0355 and 2cl/litre of water) and a suitable safety squeegee 150-054/150-055/150-056. Do not clean for at least 1 month and do not apply stickers or other adhesives to the film.

TECHNICAL DATASHEET

Data calculated based on film applied to clear glass 3 mm thick (*on double glazing 4-16-4)

Ultraviolet transmission 5 %
Visible light transmission 85 %
Reflection of external visible light 11 %
Reflection of internal visible light 11 %
Total solar energy rejected 19 %
Total solar energy rejected 2* 19 %
Solar ratio :
    Solar energy reflection 9 %
    Solar energy absorption 14 %
    Solar energy transmission 77 %
Reduction in Solar Glare 14 %
g-value 0.83
u-value 5.7
Heat loss Reduction (Winter)
Rejected Infrared (760-2500 nm)
Shading coefficient 0.9
Tensile strength (kg/cm²) 28
Elongation at break 125%
Installation type : Exterior
Roll length 30,5 m
Film composition PET
Thickness 120 μ
Colour from the outside : TRANSPARENT
Installation advice

Vertical installation and on standard glass surface*

Clear single pane solarscreen Clear single pane
Tinted single pane solarscreen Tinted single pane
Reflective tinted single pane solarscreen Reflective tinted single pane
Clear double pane solarscreen
Tinted double pane solarscreen Tinted double pane
Reflective tinted double pane solarscreen Reflective tinted double pane
Gas-filled double pane - Low E solarscreen Gas-filled double pane - Low E
STADIP EXT. clear double pane solarscreen STADIP EXT. clear double pane
STADIP INT. clear double pane solarscreen STADIP INT. clear double pane
solarscreen Yes    solarscreen Caution    solarscreen Not recommended   

*Recommendations provided on the basis of a glazed surface covering up to 2.5m².

Non-contractual data. We reserve the right to modify the composition of our films at any time. Consult our warranty documents.

Free quotation

Send your request